My Account Information
- Product Code:
- Availability:
-
$0.00
| Technical | |
| Dimensions | 116 x 57 x 20mm |
| Weight | 100g |
| Display | 2.9inch transflective type 128x64 pixel LCD Bright white LED backlight with dimming control Anti-glare film with scratch proof coating |
| Operating Conditions | |
| Operating Voltage | 12-15V nominal |
Related Products
-360x360.jpg "Door Mounting Bracket")
Door Mounting Bracket
Universal bracket that will fit any Monit tripmeter and suit both RHD or LHD cars. 2mm aluminium Matte black powder-coated Weight: 90grams ..
$95.00
Ex Tax: $82.61
Map Light - Variable Aperture
Co-drivers Avanti rally map light with variable aperture. Has an adjustable flexible shaft and comes complete with an on/off switch. The beam comes ou..
$119.98
Ex Tax: $104.33
-360x360.jpg "Windscreen Suction Mount")
Windscreen Suction Mount
The suction mount can be used to temporarily attach a rally computer to the windscreen of a vehicle and is ideal for recce or road survey use. It has ..
$94.99
Ex Tax: $82.60
-360x360.jpg "Monit Recce Kit")
Monit Recce Kit
The recce car kit bundles a windscreen suction mount with a custom G-Series wiring loom pre-wired with a cigarette lighter power adaptor and hand..
$104.99
Ex Tax: $91.30
Bulkhead GPS Antenna
The bulkhead mount antenna is a high-sensitivity GPS antenna with an integrated mounting stud. This can be used to securely fasten the antenna through..
$70.00
Ex Tax: $60.87
Magnetic GPS Antenna
The magnetic mount antenna is a high-sensitivity GPS antenna with a strong magnet built into the base. The magnet can be used to clamp the antenna ont..
$70.00
Ex Tax: $60.87
ABS Sensor Interface
The ABS interface takes the signal produced by an ABS Wheel Speed Sensor and converts it into a format that can be used to operate a Monit rally compu..
$95.00
Ex Tax: $82.61
Wiring Loom for T-100 / T-200
The spare wiring loom is identical to the standard loom supplied with all new G-Series rally computers. It can be used to replace an old or damaged lo..
$57.50
Ex Tax: $50.00
-360x360.jpg "Probe Extension Lead Kit")
Probe Extension Lead Kit
The wiring extension kit can be used to extend the distance between a Monit rally computer and a wheel speed sensor. The kit includes two extension le..
$57.50
Ex Tax: $50.00
-360x360.jpg "Foot Reset Switch")
Foot Reset Switch
The foot reset switch is a momentary type switch constructed from robust pressed steel. It can be configured to perform a range of useful functions, d..
$74.75
Ex Tax: $65.00
-360x360.jpg "Speed Sensor Interface")
Speed Sensor Interface
The speed sensor interface allows you to use a gearbox or differential mounted factory electronic speed sensor to operate a Monit rally computer. It w..
$95.00
Ex Tax: $82.61
-360x360.jpg "Inductive Wheel Probe")
Inductive Wheel Probe
The inductive wheel probe works by detecting the presence of metal as it is brought near the end of the sensor. It is typically fitted to a vehicle's ..
$95.00
Ex Tax: $82.61
-360x360.jpg "Dash Mounting Bracket")
Dash Mounting Bracket
Universal bracket that will fit any Monit tripmeter and suit both RHD or LHD cars. 2mm aluminium Matte black powder-coated Weight: 70grams ..
$95.00
Ex Tax: $82.61
Map Light - Cone
Co-drivers Avanti rally map light with cone. Has an adjustable flexible shaft and comes complete with an on/off switch and mounting screws. Available ..
$109.99
Ex Tax: $95.64